China Lsq-S5 Pull and Push Type Hydraulic Coupling coupling constant

Merchandise Description

Descripton:

LSQ-S5 Out Thread Press And Pull Type Hydraulic Fast Coupling(Steel)
Apps: The LSQ-S5 and LSQ-S5C Sequence brings to the business a confirmed design for use on construction tools, forestry products agricultural machinery, and oil equipment.

Requirements:
 

Body Dimension(in) 1/two
Rated Strain(PSI) 3000
Rated Stream(GPM) twelve
Temperature Variety(std seals) -20ºC to +120ºC
Common seal material  NBR

LSQ-S5 Sequence Couplings characteristic:
1.Double acting sleeve for 1 handed drive-to-Hook up operation when coupler is clamp or bulkhead mounted.
2.Poppet valves offered to avert uncoupled leakage.
three.Poppet valves open up instantly when coupled, in rated doing work strain, to hold the stream expeditely.
four.Crucial elements are hardened for durability.
five.Reliable ball-locking system holds the mating halves jointly.
six.Socket and plug are precision machined from sound bar inventory.
seven.LSQ-S5 collection conforms to the standard of ISO5675.
eight.Suitable with PAPKER 4250 Series, More rapidly CPV-CNV Collection.

ISO PARTNO. LS ¢D HEX1 A T
12.five LSQ-S5-04SM8L seventy three.five 38 27 12 M14*1.five
twelve.five LSQ-S5-04SM10L 73.five 38 27 twelve M16*1.five
12.5 LSQ-S5-04SM12L 73.5 38 27 twelve M18*1.five
twelve.5 LSQ-S5-04SM15L 75.5 38 27 fourteen M22*1.5
12.5 LSQ-S5-04SM18L seventy five.five 38 27 fourteen M26*1.five
twelve.5 LSQ-S5-04SM10S 73.5 38 27 twelve M18*1.five
12.5 LSQ-S5-04SM12S 73.five 38 27 twelve M20*1.five
twelve.5 LSQ-S5-04SM14S 75.5 38 27 fourteen M22*1.5
twelve.five LSQ-S5-04SM16S seventy five.5 38 27 14 M24*1.five
12.5 LSQ-S5-04SM20S 77.5 38 thirty sixteen M30*2

ISO PARTNO. LP d C HEX1 A T
12.five LSQ-S5-04PM8L fifty eight.five 20.5 27 27 12 M14*1.five
twelve.5 LSQ-S5-04PM10L fifty eight.five 20.five 27 27 12 M16*1.five
twelve.5 LSQ-S5-04PM12L 58.five 20.5 27 27 12 M18*1.five
twelve.5 LSQ-S5-04PM15L 60.5 twenty.5 27 27 fourteen M22*1.5
twelve.5 LSQ-S5-04PM18L 60.five twenty.5 27 27 fourteen M26*1.five
twelve.5 LSQ-S5-04PM10S fifty eight.five twenty.5 27 27 12 M18*1.5
twelve.five LSQ-S5-04PM12S fifty eight.5 20.5 27 27 twelve M20*1.5
12.five LSQ-S5-04PM14S sixty.five twenty.5 27 27 fourteen M22*1.5
12.5 LSQ-S5-04PM16S 60.five 20.5 27 27 fourteen M24*1.five
12.five LSQ-S5-04PM20S 62.five 20.5 27 30 sixteen M30*two

ISO PARTNO. L D HEX1 HEX2 T
12.five LSQ-S5-04-8L 109.five 38 27 27 M14*1.5
twelve.five LSQ-S5-04-10L 109.5 38 27 27 M16*1.five
twelve.five LSQ-S5-04-12L 109.5 38 27 27 M18*1.5
twelve.five LSQ-S5-04-15L 113.5 38 27 27 M22*1.5
twelve.five LSQ-S5-04-18L 113.5 38 27 27 M26*1.5
twelve.5 LSQ-S5-04-10S 109.five 38 27 27 M18*1.5
twelve.five LSQ-S5-04-12S 109.5 38 27 27 M20*1.five
twelve.five LSQ-S5-04-14S 113.five 38 27 27 M22*1.five
12.5 LSQ-S5-04-16S 113.five 38 27 27 M24*1.5
12.5 LSQ-S5-04-20S a hundred and fifteen.five 38 thirty thirty M30*two

Size: 1/2 Size Only′, All Threads Are Available
Connection: Ball Locking System
Interchangeability: ISO 5675, Ball Valve or Poppet Valve
Working Pressures: 3000psi to 5000 Psi
Transport Package: Carton
Trademark: Songqiao

###

Customization:

###

Body Size(in) 1/2
Rated Pressure(PSI) 3000
Rated Flow(GPM) 12
Temperature Range(std seals) -20ºC to +120ºC
Standard seal material  NBR

###

ISO PARTNO. LS ¢D HEX1 A T
12.5 LSQ-S5-04SM8L 73.5 38 27 12 M14*1.5
12.5 LSQ-S5-04SM10L 73.5 38 27 12 M16*1.5
12.5 LSQ-S5-04SM12L 73.5 38 27 12 M18*1.5
12.5 LSQ-S5-04SM15L 75.5 38 27 14 M22*1.5
12.5 LSQ-S5-04SM18L 75.5 38 27 14 M26*1.5
12.5 LSQ-S5-04SM10S 73.5 38 27 12 M18*1.5
12.5 LSQ-S5-04SM12S 73.5 38 27 12 M20*1.5
12.5 LSQ-S5-04SM14S 75.5 38 27 14 M22*1.5
12.5 LSQ-S5-04SM16S 75.5 38 27 14 M24*1.5
12.5 LSQ-S5-04SM20S 77.5 38 30 16 M30*2

###

ISO PARTNO. LP d C HEX1 A T
12.5 LSQ-S5-04PM8L 58.5 20.5 27 27 12 M14*1.5
12.5 LSQ-S5-04PM10L 58.5 20.5 27 27 12 M16*1.5
12.5 LSQ-S5-04PM12L 58.5 20.5 27 27 12 M18*1.5
12.5 LSQ-S5-04PM15L 60.5 20.5 27 27 14 M22*1.5
12.5 LSQ-S5-04PM18L 60.5 20.5 27 27 14 M26*1.5
12.5 LSQ-S5-04PM10S 58.5 20.5 27 27 12 M18*1.5
12.5 LSQ-S5-04PM12S 58.5 20.5 27 27 12 M20*1.5
12.5 LSQ-S5-04PM14S 60.5 20.5 27 27 14 M22*1.5
12.5 LSQ-S5-04PM16S 60.5 20.5 27 27 14 M24*1.5
12.5 LSQ-S5-04PM20S 62.5 20.5 27 30 16 M30*2

###

ISO PARTNO. L D HEX1 HEX2 T
12.5 LSQ-S5-04-8L 109.5 38 27 27 M14*1.5
12.5 LSQ-S5-04-10L 109.5 38 27 27 M16*1.5
12.5 LSQ-S5-04-12L 109.5 38 27 27 M18*1.5
12.5 LSQ-S5-04-15L 113.5 38 27 27 M22*1.5
12.5 LSQ-S5-04-18L 113.5 38 27 27 M26*1.5
12.5 LSQ-S5-04-10S 109.5 38 27 27 M18*1.5
12.5 LSQ-S5-04-12S 109.5 38 27 27 M20*1.5
12.5 LSQ-S5-04-14S 113.5 38 27 27 M22*1.5
12.5 LSQ-S5-04-16S 113.5 38 27 27 M24*1.5
12.5 LSQ-S5-04-20S 115.5 38 30 30 M30*2
Size: 1/2 Size Only′, All Threads Are Available
Connection: Ball Locking System
Interchangeability: ISO 5675, Ball Valve or Poppet Valve
Working Pressures: 3000psi to 5000 Psi
Transport Package: Carton
Trademark: Songqiao

###

Customization:

###

Body Size(in) 1/2
Rated Pressure(PSI) 3000
Rated Flow(GPM) 12
Temperature Range(std seals) -20ºC to +120ºC
Standard seal material  NBR

###

ISO PARTNO. LS ¢D HEX1 A T
12.5 LSQ-S5-04SM8L 73.5 38 27 12 M14*1.5
12.5 LSQ-S5-04SM10L 73.5 38 27 12 M16*1.5
12.5 LSQ-S5-04SM12L 73.5 38 27 12 M18*1.5
12.5 LSQ-S5-04SM15L 75.5 38 27 14 M22*1.5
12.5 LSQ-S5-04SM18L 75.5 38 27 14 M26*1.5
12.5 LSQ-S5-04SM10S 73.5 38 27 12 M18*1.5
12.5 LSQ-S5-04SM12S 73.5 38 27 12 M20*1.5
12.5 LSQ-S5-04SM14S 75.5 38 27 14 M22*1.5
12.5 LSQ-S5-04SM16S 75.5 38 27 14 M24*1.5
12.5 LSQ-S5-04SM20S 77.5 38 30 16 M30*2

###

ISO PARTNO. LP d C HEX1 A T
12.5 LSQ-S5-04PM8L 58.5 20.5 27 27 12 M14*1.5
12.5 LSQ-S5-04PM10L 58.5 20.5 27 27 12 M16*1.5
12.5 LSQ-S5-04PM12L 58.5 20.5 27 27 12 M18*1.5
12.5 LSQ-S5-04PM15L 60.5 20.5 27 27 14 M22*1.5
12.5 LSQ-S5-04PM18L 60.5 20.5 27 27 14 M26*1.5
12.5 LSQ-S5-04PM10S 58.5 20.5 27 27 12 M18*1.5
12.5 LSQ-S5-04PM12S 58.5 20.5 27 27 12 M20*1.5
12.5 LSQ-S5-04PM14S 60.5 20.5 27 27 14 M22*1.5
12.5 LSQ-S5-04PM16S 60.5 20.5 27 27 14 M24*1.5
12.5 LSQ-S5-04PM20S 62.5 20.5 27 30 16 M30*2

###

ISO PARTNO. L D HEX1 HEX2 T
12.5 LSQ-S5-04-8L 109.5 38 27 27 M14*1.5
12.5 LSQ-S5-04-10L 109.5 38 27 27 M16*1.5
12.5 LSQ-S5-04-12L 109.5 38 27 27 M18*1.5
12.5 LSQ-S5-04-15L 113.5 38 27 27 M22*1.5
12.5 LSQ-S5-04-18L 113.5 38 27 27 M26*1.5
12.5 LSQ-S5-04-10S 109.5 38 27 27 M18*1.5
12.5 LSQ-S5-04-12S 109.5 38 27 27 M20*1.5
12.5 LSQ-S5-04-14S 113.5 38 27 27 M22*1.5
12.5 LSQ-S5-04-16S 113.5 38 27 27 M24*1.5
12.5 LSQ-S5-04-20S 115.5 38 30 30 M30*2

Types of Couplings

A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.

Mechanical

The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling's spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
gearbox

Electrical

Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.

Flexible

When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling's torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
gearbox

Beam

A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The "A" series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.

Pin & bush

The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling's elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
gearbox

Mesh tooth

Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling's quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
China Lsq-S5 Pull and Push Type Hydraulic Coupling     coupling constantChina Lsq-S5 Pull and Push Type Hydraulic Coupling     coupling constant
editor by czh 2022-12-31