Merchandise Description
Copper Bulkhead with Thrust-in Coupling For Automotive Air Braking Traces
Merchandise Present
Serial variety | Kind | A | B | L | S |
1 | FT-6x1-1/eight" 901-06-049 | Φsix | 1/eight" | 47 | eighteen |
2 | FT-6x1-M12x1.5 901-06-012 | Φsix | M12x1.5 | 47 | 18 |
three | FT-8x1-1/8" 901-08-059 | Φ8 | one/8" | forty seven | eighteen |
four | FT-8x1-M12x1.5 901-08-012 | Φeight | M12x1.5 | forty seven | eighteen |
5 | FT-8x1-M14x1.5 901-08-014 | Φeight | M14x1.five | forty seven | 18 |
6 | FT-8x1-M16x1.5 901-08-016 | Φeight | M16x1.5 | forty seven | 22 |
7 | FT-8x1-M18x1.5 901-08-018 | Φ8 | M18x1.five | 47 | 24 |
eight | FT-8x1-M22x1.5 901-08-571 | Φeight | M22x1.five | 47 | 28 |
nine | FT-10x1.twenty five-M14x1.5 901-10-014 | Φten | M14x1.five | forty seven | 18 |
10 | FT-10x1.25-M16x1.5 901-10-016 | Φ10 | M16x1.five | 47 | 22 |
11 | FT-10x1.25-3/8" 901-10-051 | Φten | three/eight" | 47 | 22 |
12 | FT-10x1.twenty five-M18x1.5 901-ten-018 | Φten | M18x1.5 | 47 | 24 |
13 | FT-10x1.twenty five-M22x1.5 901-10-122 | Φten | M22x1.five | forty seven | 28 |
14 | FT-12x1.5-M16x1.5 901-twelve-016 | Φtwelve | M16x1.five | 47 | 22 |
fifteen | FT-12x1.5-M18x1.5 901-12-018 | Φtwelve | M18x1.five | 47 | 24 |
sixteen | FT-12x1.5-3/eight" 901-twelve-051 | Φtwelve | 3/8" | forty seven | 22 |
17 | FT-12x1.5-M22x1.5 901-twelve-571 | Φ12 | M22x1.5 | 47 | 28 |
18 | FT-14x1.5-M16x1.5 901-14-016 | Φ14 | M16x1.5 | forty seven | 22 |
19 | FT-14x1.5-M18x1.5 901-fourteen-018 | Φfourteen | M18x1.5 | 47 | 24 |
20 | FT-14x1.5-M22x1.5 901-14-571 | Φ14 | M22x1.five | 47 | 28 |
21 | FT-16x2-M18x1.5 901-16-018 | Φsixteen | M18x1.5 | 47 | 24 |
22 | FT-16x2-M22x1.5 901-sixteen-571 | Φsixteen | M22x1.5 | forty seven | 28 |
23 | FT-16x2-M16x1.5 901-16-016 | Φ16 | M16x1.5 | 47 | 24 |
About us
HangZhou expectations rubber goods Co., Ltd. has been concentrating on injection molding engineering, supporting the major auto pipeline system products, produced and developed an air coupling method primarily based on CZPT materials and brass. pneumatic system coupling technique is produced for use with Polyamide and Hytrel tubing for the compressed air circuits on professional vehicles , and is fulfilling all international demands.
The meticulously designed, matured and considerate pneumatic technique couplings consists of the following elements:
• Threadless Press-in coupling
• Integral push-in coupling
• Swivels copper
• Bulkhead couplings
• Constructing Blocks
• Rotolock
• Test Points
• Hose nipples
• hose connector
• Accessories
This new era of couplings, dependent on CZPT supplies in blend with foremost coupling technological innovation.
Brass parts protected structural integrity in hugely pressured locations.
A single world-wide method, satisfying diverse engineering philosophies inside of truck, bus, trailer, off-street programs.
Functions & Positive aspects:
•Design versatility
•Full releasability
•Integrated security
•System expense reduction
•One worldwide method
•Up to 83 % weight reduction
FAQ
Qone. Can I have samples for tests ahead of spot bulk order?
Sure, we are pleased to deliver you samples to examination the quality and overall performance.
Q2. Can you produce the products with our brand?
Yes, OEM services is obtainable.
Qthree. What is your Bare minimum Buy Quantity?
Diverse items have distinct MOQ. If we have stock, generally it truly is 100pcs
Qfour. How can I make payment?
You can pay by way of TT bank transfer, Western Union or Money Gram as you like!
Qfive. What about shipping and delivery date?
If we have free of charge stock of the item you require. We can deliver merchandise to you inside of 7 doing work days right after deposit or 100% payment into our lender account.
If we don't have the stock, the supply day can be different for distinct merchandise.
Standard: | DIN, ANSI, GB, JIS, ISO |
---|---|
Material: | Nylon |
Connection: | Male |
Surface Treatment: | Without Treatment |
Head Type: | Round |
Use: | Pneumaitic Equipment |
###
Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Serial number | Type | A | B | L | S |
1 | FT-6x1-1/8" 901-06-049 | Φ6 | 1/8" | 47 | 18 |
2 | FT-6x1-M12x1.5 901-06-012 | Φ6 | M12x1.5 | 47 | 18 |
3 | FT-8x1-1/8" 901-08-059 | Φ8 | 1/8" | 47 | 18 |
4 | FT-8x1-M12x1.5 901-08-012 | Φ8 | M12x1.5 | 47 | 18 |
5 | FT-8x1-M14x1.5 901-08-014 | Φ8 | M14x1.5 | 47 | 18 |
6 | FT-8x1-M16x1.5 901-08-016 | Φ8 | M16x1.5 | 47 | 22 |
7 | FT-8x1-M18x1.5 901-08-018 | Φ8 | M18x1.5 | 47 | 24 |
8 | FT-8x1-M22x1.5 901-08-022 | Φ8 | M22x1.5 | 47 | 28 |
9 | FT-10x1.25-M14x1.5 901-10-014 | Φ10 | M14x1.5 | 47 | 18 |
10 | FT-10x1.25-M16x1.5 901-10-016 | Φ10 | M16x1.5 | 47 | 22 |
11 | FT-10x1.25-3/8" 901-10-051 | Φ10 | 3/8" | 47 | 22 |
12 | FT-10x1.25-M18x1.5 901-10-018 | Φ10 | M18x1.5 | 47 | 24 |
13 | FT-10x1.25-M22x1.5 901-10-122 | Φ10 | M22x1.5 | 47 | 28 |
14 | FT-12x1.5-M16x1.5 901-12-016 | Φ12 | M16x1.5 | 47 | 22 |
15 | FT-12x1.5-M18x1.5 901-12-018 | Φ12 | M18x1.5 | 47 | 24 |
16 | FT-12x1.5-3/8" 901-12-051 | Φ12 | 3/8" | 47 | 22 |
17 | FT-12x1.5-M22x1.5 901-12-022 | Φ12 | M22x1.5 | 47 | 28 |
18 | FT-14x1.5-M16x1.5 901-14-016 | Φ14 | M16x1.5 | 47 | 22 |
19 | FT-14x1.5-M18x1.5 901-14-018 | Φ14 | M18x1.5 | 47 | 24 |
20 | FT-14x1.5-M22x1.5 901-14-022 | Φ14 | M22x1.5 | 47 | 28 |
21 | FT-16x2-M18x1.5 901-16-018 | Φ16 | M18x1.5 | 47 | 24 |
22 | FT-16x2-M22x1.5 901-16-022 | Φ16 | M22x1.5 | 47 | 28 |
23 | FT-16x2-M16x1.5 901-16-016 | Φ16 | M16x1.5 | 47 | 24 |
Standard: | DIN, ANSI, GB, JIS, ISO |
---|---|
Material: | Nylon |
Connection: | Male |
Surface Treatment: | Without Treatment |
Head Type: | Round |
Use: | Pneumaitic Equipment |
###
Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Serial number | Type | A | B | L | S |
1 | FT-6x1-1/8" 901-06-049 | Φ6 | 1/8" | 47 | 18 |
2 | FT-6x1-M12x1.5 901-06-012 | Φ6 | M12x1.5 | 47 | 18 |
3 | FT-8x1-1/8" 901-08-059 | Φ8 | 1/8" | 47 | 18 |
4 | FT-8x1-M12x1.5 901-08-012 | Φ8 | M12x1.5 | 47 | 18 |
5 | FT-8x1-M14x1.5 901-08-014 | Φ8 | M14x1.5 | 47 | 18 |
6 | FT-8x1-M16x1.5 901-08-016 | Φ8 | M16x1.5 | 47 | 22 |
7 | FT-8x1-M18x1.5 901-08-018 | Φ8 | M18x1.5 | 47 | 24 |
8 | FT-8x1-M22x1.5 901-08-022 | Φ8 | M22x1.5 | 47 | 28 |
9 | FT-10x1.25-M14x1.5 901-10-014 | Φ10 | M14x1.5 | 47 | 18 |
10 | FT-10x1.25-M16x1.5 901-10-016 | Φ10 | M16x1.5 | 47 | 22 |
11 | FT-10x1.25-3/8" 901-10-051 | Φ10 | 3/8" | 47 | 22 |
12 | FT-10x1.25-M18x1.5 901-10-018 | Φ10 | M18x1.5 | 47 | 24 |
13 | FT-10x1.25-M22x1.5 901-10-122 | Φ10 | M22x1.5 | 47 | 28 |
14 | FT-12x1.5-M16x1.5 901-12-016 | Φ12 | M16x1.5 | 47 | 22 |
15 | FT-12x1.5-M18x1.5 901-12-018 | Φ12 | M18x1.5 | 47 | 24 |
16 | FT-12x1.5-3/8" 901-12-051 | Φ12 | 3/8" | 47 | 22 |
17 | FT-12x1.5-M22x1.5 901-12-022 | Φ12 | M22x1.5 | 47 | 28 |
18 | FT-14x1.5-M16x1.5 901-14-016 | Φ14 | M16x1.5 | 47 | 22 |
19 | FT-14x1.5-M18x1.5 901-14-018 | Φ14 | M18x1.5 | 47 | 24 |
20 | FT-14x1.5-M22x1.5 901-14-022 | Φ14 | M22x1.5 | 47 | 28 |
21 | FT-16x2-M18x1.5 901-16-018 | Φ16 | M18x1.5 | 47 | 24 |
22 | FT-16x2-M22x1.5 901-16-022 | Φ16 | M22x1.5 | 47 | 28 |
23 | FT-16x2-M16x1.5 901-16-016 | Φ16 | M16x1.5 | 47 | 24 |
What Is a Coupling?
A coupling is a device that connects two shafts together. It transmits power from one to the other and is used to join rotating equipment. It can also allow for some degree of misalignment and end movement. It is used in mechanical engineering and manufacturing. To learn more about couplings, read this article.
Mechanical connection between two objectsThe present invention relates to a method and assembly for forming a mechanical connection between two objects. The methods of this invention are suitable for connecting both solid and hollow objects. For example, the method can be used to make mechanical connections between two cylinders. This method is particularly useful for connecting two cylinders that are positioned near each other.
Absorbs vibration
A coupling insert is a part of a vehicle's drivetrain that absorbs vibrations. These inserts are designed to prevent couplings from moving out of phase. However, the coupling inserts themselves can wear out and need to be replaced. Universal joints are an alternative if the coupling is out of phase by more than one degree. In addition, internal bearings in the coupling need to be lubricated and replaced when they begin to show signs of wear.
Another embodiment of the invention includes a flexible coupling 25 that includes rearwardly-extending lugs that extend toward the coupling member 23. These lugs interdigitate with corresponding lugs on the coupling member 23. They are spaced circumferentially. A first elastic member 28 is interposed between lugs 26 and 27, and is adapted to yield in a counterclockwise direction. As a result, it absorbs torsional vibrations.
Blocks heat transfer
Thermal coupling occurs when a solid block is thermally coupled to the air or fluid passing through it. The amount of heat transferred through a solid block depends on the heat transfer coefficients of the materials. This paper presents a numerical model to understand how heat transfers through different block materials. This work also describes the thermal resistance network for a one-dimensional block.
In some cases, thermal coupling increases the heat transfer mechanism. As illustrated in FIG. 1D, a heatpipe coupler 112 couples two heatpipes 110-1 and 110-2. This configuration allows the pipes to be coupled to the heat source and to the condenser. In addition, the heat pipe couplers may have bellows at the ends to help facilitate linear motion.
Thermal coupling is achieved by ensuring that at least one block is made of a material with a lower thermal expansion coefficient than the annulus. Ideally, the block's mean thermal expansion coefficient is at least twenty percent lower than the annulus's mean thermal expansion coefficient. This ensures that the thermal coupling between the two parts is as efficient as possible.
Another type of thermal coupling is achieved by using flexible elements. These are often washers or springs. These components allow the blocks to maintain physical contact with the post 55, which means that the heat transfer is more efficient even at higher temperatures. The flexibility of these elements also makes it possible to choose an element that will not impede assembly.
Protects rotating equipment
A reliable, long-lasting coupling system can reduce the risk of damage to rotating equipment. Designed to protect against torque overload and wear, Voith torque-limiting couplings provide outstanding safety and reliability. As a result, they can deliver maximum performance and minimize equipment downtime. In addition to their long-term benefits, these solutions are ideal for applications where safety and reliability are of paramount importance.
A good coupling provides many advantages, including the ability to transmit power, compensate for axial movement, and absorb shock. It is essential to choose the proper coupling for your application based on the basic conditions of your rotating equipment. For example, if you have two shafts with parallel rotation axes, you should choose a parallel coupling. Otherwise, you should use an angular coupling.
Torque-limiting couplings can also provide protection for rotating equipment by disengaging at a specific torque level. This protects the drive shaft from undergoing catastrophic failure. Torque limiters are particularly helpful for high-value equipment. By preventing catastrophic failure, you can avoid expensive repairs and minimize equipment downtime.
Coupling guards are easy to install and provide effective protection for rotating equipment. These covers are made of sheet metal bent to fit over the shaft. They are durable and easy to remove when necessary. This type of guard can prevent employees from catching their hands, tools, or loose clothing on motor coupling components.
editor by czh 2022-12-08